Which turbo timer will suit my vehicle?

Use this tool to determine which of our turbo timers will suit your truck, excavator or other heavy commercial vehicle or machine.

If your vehicle is a passenger, 4WD or light commercial vehicle, use the guide on our Passenger Vehicles page.

To use the tool, enter the make and model of the vehicle. For some vehicles, additional information, such as the model number and year of manufacture are also required.

If you have any doubt about which turbo timer model should be used,or your vehicle is not listed then contact us.

The turbo timer to suit your vehicle is Turbo Timer X104

Vehicle notes for this model are:

These products are available through our dealer network in Australia and New Zealand. Use our Dealer Locator to find dealers near you.

You can also buy from our Web Store.

Trade prices are available for automotive businesses. Contact us for details

Our wire in turbo timers are the basis of our entire range of turbo timer products. They are available in a variety of models which are suitable for any vehicle type and generally suitable for situations where an appropriate plug in turbo timer is not available.

All models suit both 12 volt and 24 volt vehicles of all types.

In addition to our range of current 925 Series wire in turbo timers, we have X Series idle timers. These are designed to operate in the electrically and physically demanding environments encountered in earthmoving, agricultural and industrial applications.

There are three models in the X Series range; single output (X104), double output (X105) and energize to stop (X106). All three are suitable for electronic controlled or non-electronic controlled engines.

All X Series timers operate in both 12 and 24 volt applications.

The timers are a two-piece design with a small module, which can be easily mounted behind a control panel, and an override (stop) switch that is mounted either flush in the dash or panel or on the bracket provided.

The override switch is water and dust proof and can be mounted in an exposed position. The switch is metal with push button operation. It has an LED indicator that flashes when the timer is active.

A rotary switch inside the timer module allows the installer to select any of 10 idle periods ranging from 30 seconds to 30 minutes. The default factory setting is 3 minutes.


Wire-in 925 Series Turbo Timer

Wire-in 925 Series Turbo Timer

X Series idle timer

X Series Idle Timer

Bogaard Commercial Vehicles Turbo Timers ordering guide

Click to download our Truck, Machinery,
Equipment and Engines Ordering Guide